Firmware

Firmware updates for RC Logger product family. Please read the “Firmware update” section of your product operating instructions / user manual carefully before performing any firmware update. Incorrect firmware update procedure may render your product being unusable. Never interrupt the updating process. By downloading any of our files you agree to our terms and conditions as well as the software disclaimer provided below.

Filename Version Size Release date Request Link

RC Eye Novax 350

NovaX Firmware v3.0 – Upgrade Pack
The firmware of RC EYE NovaX 350 / 350 Plus (v3.0) is upgraded.
1.1.0.0 5.16 MB 01 Jun 17 317

[Warning]

Do not use this firmware with any other hardware nor do not interrupt the update process as it may render your product unusable.

[Firmware Update Procedure]

  1. Download the NovaX Firmware V3.0 Upgrade Pack.
  2. Follow the instructions in the Read me file.

*R8 Radio System firmware v1.1.2 or above is required*

[Version 3.0 Changes] 2016/12/16

  1. Point of Interest (POI) now integrated in Task Point Menu
  2. Low battery warning notification from R8 Radio
  3. Bug fixes
  4. Flight enhancements

RC Logger R8 Radio System – Upgrade Pack v1.2
With the updates in place, your R8 radio will now give an audible tone notifying you when the voltage in your lipo is low.
1.2 0.39 MB 01 Jun 17 323
[Warning]

Do not use this firmware with any other hardware nor do not interrupt the update process as it may render your product unusable.

[Firmware Update Procedure]

  1. Unzip the downloaded file.
  2. Go to firmware upgrade page in LCD manual of R8 remote. Hold “OK” to confirm.
  3. Connect R8 remote trainer port to PC via upgrade cable in the delivery package.
  4. Run the upgrade pack on PC, select a correct COM port.
  5. Click “Start Upgrade” and wait for the upgrade to be completed.
  6. Rebinding the transmitter and the receiver is required.

*NovaX firmware version v3.0 or above is required*

[Version 1.2 Changes] 2016/12/20

  1. Low battery warning notification from R8 Radio

R8 Radio System

RC Logger R8 Radio System – Upgrade Pack v1.2
With the updates in place, your R8 radio will now give an audible tone notifying you when the voltage in your lipo is low.
1.2 0.39 MB 01 Jun 17 323
[Warning]

Do not use this firmware with any other hardware nor do not interrupt the update process as it may render your product unusable.

[Firmware Update Procedure]

  1. Unzip the downloaded file.
  2. Go to firmware upgrade page in LCD manual of R8 remote. Hold “OK” to confirm.
  3. Connect R8 remote trainer port to PC via upgrade cable in the delivery package.
  4. Run the upgrade pack on PC, select a correct COM port.
  5. Click “Start Upgrade” and wait for the upgrade to be completed.
  6. Rebinding the transmitter and the receiver is required.

*NovaX firmware version v3.0 or above is required*

[Version 1.2 Changes] 2016/12/20

  1. Low battery warning notification from R8 Radio

Software Disclaimer: This software is provided by the copyright holders and contributors “as is” and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the copyright owner or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.