These Xtreme Motor Mounts (Aluminium) are the optimal motor mount upgrades for the RC EYE One Xtreme stock frames and are also suitable for the Phoenix Flight Gear carbon frames. Produced by CNC machines, these aluminium mounts deliver maximum performance with minimal weight to give you the flying experience that you deserve.

Lightweight, Anodized Aluminium
The lightweight aluminium, combined with anodized color coating provides the ideal durability, corrosion-resistant and aesthetic finish to the motor mounts for your Xtreme.
More Than Just Good-Looking
The aluminium mounts also acts as a heat sink, which dissipates excessive heat generated by the Xtreme motors. Therefore, they could help your motors run at a lower temperature, perform better, and ultimately, extend its operational life.
Better at securing motors
Each mount utilizes a two-screw-lock-in design and firmly secures the motor in place while you perform acrobatic flips and professional manuevers with your Xtreme.
What’s included

2 x Xtreme Motor Mounts (Aluminium), Black anodized

2 x Xtreme Motor Mounts (Aluminium), Red anodized

8 x Screws with no head (Hexagon M3x3 type)*

8 x Short screws (2×3 KM type)*

8 x Long screws (M2x6 type, optional for Phoenix Flight Gear carbon upgrade frames)

8 x Nuts (M2 type, optional for Phoenix Flight Gear carbon upgrade frames)

1 x Hexagonal key tool
* Screws are compatible with Aluminium Motor Mounts only. If you would like to use the original motor mounts still in the future, please keep the original screws. It is also recommended to use a drop of Loctite Threadlocker Blue 242 or similar on each motor mount screw to secure the metal to metal connections to prevent them from getting lose over time due to vibrations.
RC EYE One Xtreme
Dimensions (W x H x D) | 1.4 x 0.5 x 0.35 inches (35 x 12 x 9 mm) |
Weight | 0.10 oz per mount (2.9 g per mount), Excluding screws and nuts |
Accessories
INSTRUCTION MANUAL
Installation Instructions