This topic contains 4 replies, has 2 voices, and was last updated by  Jamie Camp 1 year, 9 months ago.

  • Author
    Posts
  • #10857

    GARY HASBERRY
    Participant

    How do i bind my r8 radio to my navigator 250 arf  ? i can not seem to find any information on how to . Do i use the app ?

  • #10858

    Jamie Camp
    Moderator

    How do i bind my r8 radio to my navigator 250 arf ? i can not seem to find any information on how to . Do i use the app ?

    Hey Gary,

    Thanks for reaching out to us and asking about this.

    I will be happy to assist you in getting your Navigator 250 bound to your current radio.

    The process is fairly straight forward and you should be up and running in no time.

    The basic steps are as follows:

    1. Select new model in radio

    2. Put Navigator in pairing mode

    3. Turn on R8 radio in bind mode

    4. Navigator and R8 will connect

    5. Follow standard calibration procedures of the Navigator found in the user manual or the app

     

    Here is a link to the user manual for the R8 radio:

    file:///Users/pastorjamie/Downloads/89102RC_v4_1015_02_m_en_1_M2.pdf

    In section 11.4 it explains selecting and naming a new model.

    (you can click on images for larger size)

    Screen Shot 2018-03-02 at 1.13.36 AM

    once you’ve setup a new model you can turn the radio off.

    Now you will put the radio in bind mode and pair the Navigator 250.

    This can be found in section 15 of the Navigator User Manual:

     

    Screen Shot 2018-03-02 at 1.18.31 AM

    Now you’re all set. You can use the app to do the calibrations and channel learning.

    In order to switch back and forth between your Navigator 250 and NovaX 350 just select between the models in your radio.

    I hope that helps get you up and going. If you have any other questions or need any further assistance don’t hesitate to let us know. We will be happy to help!

    Best regards,

    Jamie

     

    1 user thanked author for this post.
  • #10862

    GARY HASBERRY
    Participant

    Ok Thanks i will try this . Also the right rear light on the right rear landing gear is not working i have a extra gear i got from amazon but i can not find any instruction on how to replace the gear itself . maybe its the connector ?

  • #10864

    GARY HASBERRY
    Participant

    Well i got the radio to bind but there is a another problem besides the light on the right rear leg the camera is not working . The knob on the radio has no control over it when its not in stabilization mode and it does nothing when stabilization mode is on. when power is applied to the craft there also is a whining noise .

  • #10880

    Jamie Camp
    Moderator

    Hey Gary,

    Great to hear from you. We have updated your ticket in our system again regarding this issue.

    Hopefully we can get you up and flying with minimal delay.

    Best regards,

    Jamie

You must be logged in to reply to this topic.