Home Forums RC EYE Multirotor Series EYE Navigator 250: General Discussion Pulls hard right and crashes

This topic contains 3 replies, has 1 voice, and was last updated by  Jim W 1 week, 3 days ago.

  • Author
    Posts
  • #13286

    Jim W
    Participant

    hi Jamie. I bought a right front arm from Amazon just for the arm fold screw. I got it today.  Put it on and went outside. The drone will fly in GPS mode but you can tell it’s struggling. In basic mode it lifts and just crashes hard to the right. All is calibrated. I submitted two more tickets. Check them out for more info. I think this is more evidence that I received a used drone from Amazon. Please advise.

  • #13288

    Jim W
    Participant

    Is it possible that this could occurs because the R8 firmware is updated but the firmware on the Nav250 has not yet been updated? The Nav is still running 2.0

  • #13289

    Jim W
    Participant

    The update didn’t help. I’m gonna go through the calibration process again. I’ll let you know how it goes. I apologize for my frustration. I trust that you’re doing the best you can. It’s just that due to time difference (your day is my night and vice versa) it takes a long time to communicate. I have until February 22 to return it to Amazon.  Just to be clear this is not a drift to the right it’s a hard fast bank right. Like acro mode (and no I wasn’t in acro mode)

  • #13292

    Jim W
    Participant

    Calibration did nothing.

You must be logged in to reply to this topic.